WorkBench Components - Grow Your Capabilities

2x3 Clicks - package of Two

The most popular and useful size Clicks.

Mount 300 pin breadboads with sticky tape.

Use with Slides for Arduino or Raspberry Pi boards.
Direct-Mount Hardware enables you to add other electronics easily without a Slide adapter.

3D printed ABS plastic
Mounting platform: 2.53” x 3.35” (64.33mm x 85.4mm)

> Electronics Mounting Guide

> WorkBench PDK Users Guide

> Attach and release Clicks from the Base


1x3 Clicks - package of two

Efficient size Click for smaller electronics.

Use with Slide for AdaFruit Feather, FeatherWing or Particle Argon, Boron or Xenon boards.
Direct-Mount Hardware enables you to add other electronics easily without a Slide adapter.

3D printed ABS plastic
Mounting platform: 1.56” x 3.35” (40mm x 85.4mm)

> Electronics Mounting Guide

> WorkBench PDK Users Guide

> Attach and release Clicks from the Base



One Arduino slide with One 2x3 click

Mount Arduino UNO, or use with any board with the same configuration, including the Arduino MEGA

ABS plastic; 3D print
Comes with a 2x3 Click and assembly hardware

Assembly hardware includes: 4 M2.5 hex nuts, 4 M3.0 hex huts, 4 M2.5 x 6 machine screws, 1 M2.5 x 20 machine screw as an insertion tool.

When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Arduino multiple times without causing any damage to the Slide.

The Arduino MEGA attaches to this Slide with four screws only, and has a partial overhang.

Ardunio NOT included. Photos showing electronics are for reference only.

> Click/Slide Assembly Guide


One Raspberry Pi 2/3/4 Slide with one 2x3 Click

Mount Raspberry Pi 2, 3 or 4, or any other board with the same configuration.

ABS plastic; 3D print
Comes with a 2x3 Click and assembly hardware

Assembly hardware includes: 4 M2.5 hex nuts, 4 M3.0 hex huts, 4 M2.5 x 6 machine screws, 1 M2.5 x 20 machine screw as an insertion tool.

When installed in the raised bosses, hex nuts enable you to firmly attach and easily remove the Arduino multiple times without causing any damage to the Slide.

Raspberry Pi NOT included. Photos showing electronics are for reference only.

> Click/Slide Assembly Guide


One Slide, Feather/Particle

Mount AdaFruit Feather 32u4 Basic, or Particle Argon, Boron or Xenon, or any board with the same configuration. Also accepts the Adafruit FeatherWing Kit (terminal block breakout board)

ABS plastic; 3D print
Assemble with a 1x3 Click

Assembly includes M2.5 hex nuts installed in the raised bosses; hex nuts enable you to firmly attach and easily remove PCBs multiple times without causing any damage to the Slide.

> Click/Slide Assembly Guide


IMG_2882A.jpg

Direct-Mount Hardware Packet

Sufficient to direct-mount five or more items to Clicks

20 Tubular standoffs (round spacers) (#4 nylon 3/8”)

20 #2 x 5/8” self-tapping (sheet metal) screws (18-8 stainless steel)

> Electronics Mounting Guide